Fingerprint Identification Module Fingerprint Lock Optical Development Boards 10pin

Description:
Simple to use: as long as there is a serial microcontroller, embedded can operate the module, MSP430, 51, AVR, PIC, STM32, ARM, FPGA, Arduino controller, pcDuino, etc. can operate the module. You can also use the computer's serial port to control the module through the serial port.

The product is composed of optical fingerprint sensor, high speed DSP processor, high performance fingerprint matching algorithm, super large capacity FLASH chip and other hardware and software components. The fingerprint module has the functions of fingerprint collection, fingerprint registration, fingerprint matching and fingerprint search.

Parameter:
The power supply voltage: DC 3.6~6.0V
The supply current: working current: <120mA     peak current: <140mA

The fingerprint image entry time: less than 1 seconds
The window size: 14 x 18 mm
The characteristics of the file: 256 bytes
The template file: 512 bytes
The storage capacity: 1000
The false acceptance rate (FAR): < 0.001% (safety grade 3)
The FRR (FRR): < 1% (safety grade 3)
The search time: less than 1 seconds (1:500, mean)
The host computer interface: UART (TTL logic level)
The baud rate (UART): (9600 * N) BPS N=1 ~ 12 (the default value of N=6 57600bps)
The working environment: temperature: -20℃ ~ +50℃    Relative humidity: 40%RH ~ 85%RH (no condensation)
The storage environment: temperature: -40℃ ~ +85℃     Relative humidity: less than 85%H (without dew)