Product Description:1. On-board micro-precision current transformer2. Onboard sampling resistor3. Modules 5A can be measured within an alternating current, the analog output corresponding to 5A/5mA4. Rated input current: 5A5. Rated output current: 5mA6. Change: 1000: 17. The linear range: 0 ~ 10A (1..
Five channel flame sensor design, wide range of detection (the detection range of the ordinary single flame sensor is probably about 30°, as the distance increases, the range is gradually reduced, the detection range of the product is greater than 120°)Able to output a digital signal (high and..
This item is an RFID 13.56MHz IC reader, reading distance up to 8cm, which is widely used for RFID radio frequency identification system and projects, such as automated parking management, personal identification and production access control.This RFID card reader can read RFID card serial number an..
Product DescriptionThe thermopile sensor uses a Si-based chip and carries a radiation sensitive area, which ishermetically sealed into a metal housing, with an infrared filter of 5-14u. The thermopile outputsignal is direct proportional to incident radiation power largely independent from the wavele..
Component listing: 1 x Joystick Module 1 x Relay Module 1 x Rotary Encoder Module 1 x DS-3231 RTC Module 1 x Ultrasonic Sensor Module 1 x HC-SR501 PIR sensor Module 1 x Flame Sensor Module 1 x Linear Hall Module 1 x Metal Touch Module 1 x Digital Tem..
Module Features:1. Can detect the flame or the wavelength at 760 nm to 1100 nm range of the light source,the test flame lighters distance of 80cm, the larger the flame,the greater the distance test.2. The detection angle of 60 degrees, the flame spectrum particularly sensitive.3. Sensitivity adjusta..