Compatible Arduino Boards
-250x250.jpg "Uno r3 with USB Cable - Arduino Compatible")
Hot
2-3 weeks
Product Description:ATMEGA16U22MEGA328PUNO R3 Package Include:1 x UNO R3 MEGA328P ATMEGA16U2 board1 x USB Cable..
5.500 OMR
Hot
2-3 weeks
Product Description CH340G Replace ATMEGA16U2 / CH340G Microcontroller:ATmega2560 Operating Voltage:5V Input Voltage (recommended):7-12V Input Voltage (limits):6-20V&nb..
9.500 OMR
Microcontroller: ATmega328;Architecture: AVROperating Voltage: 5 V;Flash Memory: 32 KB of which 2 KB used by bootloaderSRAM: 2 KB; EEPROM: 1 KBClock Speed: 16 MHz;Analog I/O Pins: 8DC Current per I/O Pins: 40 mA (I/O Pins)Input Voltage: 7-12 V; Power Consumption: 19 mAPWM Output: 6; Digital I/O Pins..
3.200 OMR
Leonardo R3 + Micro USB Cable- ATmega32u4 microcontroller,- Operating voltage 5V,- Power (recommended) 7-12V,- Digital pins I / O 20 (of which 7 can be used as PWM outputs),- Analog input pins 12,- DC current through I / O Pin 40 mA,- DC current for pin 3.3V 50 mA,- Flash memory 32 KB (of whic..
5.000 OMR
-250x250.jpg "Nano V3.0 CH340 Chip - Arduino Compatible")
2-3 weeks
CH340G Replace FT232RLOperating Voltagelogic level:5V8 analog inputs ports:A0 ~ A714 Digital input / output ports:TX,RX,D2 ~ D136 PWM ports:D3, D5, D6, D9, D10, D111 pairs of TTL level serial transceiver ports RX / TXUsing Atmel Atmega328P-AU MCUThere is bootloader installed in itSupport USB downloa..
3.200 OMR
New
DescriptionFor the time being, the CH9102X driver only supports Windows, MOS system will be improved later
Win10 system automatic installation drive
support high baud rate better stability.
ESP32 Development Board CH9102X WiFi+Bluetooth Ultra-Low Power Consumption Dual Core ESP-32 ESP-32S Similar..
3.400 OMR
Description:Built-in 520 KB SRAM, external 4M PSRAMSupports interfaces such as UART/SPI/I2C/PWM/ADC/DACSupport OV2640 and OV7670 cameras, built-in flashSupport image WiFi uploadand Support TF cardSupport STA/STA+ap working modeLow-power dual-core 32-bit CPU for application processorsSpecification:Mo..
5.500 OMR
1-3 Days
NodeMCU is a Wi-Fi card designed to be used in IoT projects. It is based on an ESP8266 circuit and all its pins are available. In addition, a voltage regulator has been added, as well as a USB programming port. You can program with LUA or through the Arduino IDEIts use is very widespread so there is..
2.400 OMR
2-3 weeks
Kuongshun UNO R3 Development Board MEGA328P 100% original ATMEGA16U2 CHIP for Arduino Uno R3Kuongshun UNO R3 board is 100% compatible with original Ardui-no, now it has perfect quality and performance , we believe it will provide exciting use experience to you!Ardui-no is an open-source physic..
5.800 OMR
This revision uses the ATmega328V instead of the ATmega168V. All other detials are identical to version 03.LilyPad Arduino 03This revision has a 6-pin programming header that's compatible with FTDI USB cables and the Sparkfun FTDI Basic Breakout. It adds support for automatic reset, allowing sketche..
3.400 OMR
2-3 weeks
CH340G Replace ATMEGA16U2 Microcontroller:ATmega2560 Operating Voltage:5V Input Voltage (recommended):7-12V Input Voltage (limits):6-20V Digital I/O Pins:54 (of which 15 provide PWM output) Analog Input Pins:16 DC Current p..
8.000 OMR
In Stock
MEGA ADK +Usb Cable - Arduino Compatible..
13.000 OMR