Displays
New
10.1" HDMI Touch DisplaySize10.1"Resolution1024×600Display InterfaceHDMIDisplay PanelIPSViewing Angle170°Touch TypeResistiveTouch PortSPIOSD MenuBrightness/ContrastCertificationCEDevice & System Support Raspberry PiDirectly Pluggable: Raspberry Pi 4B / 3B+ / 3A+ / 3B / 2B / 1B+ / 1A+Additio..
45.000 OMR
1-3 Days
13.3" HDMI Touch Display V1Size13.3"Resolution1920×1080Display PortHDMI / VGADisplay PanelIPSViewing Angle178°Touch TypeCapacitiveTouch Points10-PointsTouch PortUSBTouch PanelToughened GlassOSD MenuBrightness/ContrastSoundHi-Fi SpeakerAudio Output3.5mm JackGamingXbox360/PS4/SwitchEnclosureABSCe..
70.000 OMR
1-3 Days
3-5 Days
1-3 Days
OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption.Driver IC: SSD1306Size: 0.91 inch OLEDResolution: 128 x 32IIC interfacePin Description:GND: Power GroundVCC: Power + (DC 3.3 ~5v)SCL: Clock LineSDA: Data Lin..
1.500 OMR
1-3 Days
Description:- Size: 0.96- Resolution: 128X64- Viewing angle: greater than 160 degrees- Supported platforms: for arduino, 51 series, MSP430 series, STIM32 / 2, SCR chips- Low power consumption: 0.04W during normal operation- Support wide voltage: 3.3V-5V DC- Working temperature: -30-80 degrees- Volum..
1.600 OMR
-250x250.jpg "1.3\" Inch 240*240 RGB TFT IPS LCD Module 7pin")
1-3 Days
1.3 Inch IPS OLED Display Module 240*240 RGB TFT for Arduino DIY LCD Board ST7789 7Pin 4-Wire ElectronicParameter:Size: 1.3 inchesMaterial: HD IPS color screen, brighter than ordinary TFT LCDResolution: 240 * 240 display direction can be adjusted, square FounderControl chip: ST7789Display area: 23.4..
3.800 OMR
Arduino 3.5 inch lcd touch screen with a touch pen.● Compatible with UNO and Arduino Mega2560 development board directly, no any wiring needed.● 3.5 inch screen is designed for arduino board modules, 320*480 resolution, better display. No external power supply needed● We offer free tutorial fo..
8.400 OMR
Features: PCB size 82.8mm X 56.6mm X 1.6mm
Power supply: 5V DC
RoSH: Yes..
1.700 OMR
Display construction: 16 Characters * 2 LinesDimensions: 5.74cm × 8.24cmComes with a 16×2 Blue & White LCDPlug and play with any Raspberry PiUses only the I2C (SDA/SCL) pinsThis board/chip uses I2C 7-bit address 0x20RBG backlightPluggable LCD1602 module..
5.000 OMR
1-3 Days
Product Description-The Enhanced Series hardware feature of 3.5″ and above is more powerful than Nextion Basic Series in terms of MCU, Flash Storage and SRAM.-The Enhanced Series integrates RTC for keeping accurate time, EEPROM for users’ data storage and 8 digital GPIOs (4 PWM capable).-For Nextion..
66.600 OMR