Hantek DSO5102B Digital Oscillsocope 2 Channels 100Mhz 1GSa/s UK Plug
2-3 weeks
Hantek DSO5102B Digital Oscillsocope 2 Channels 100Mhz 1GSa/s UK Plug
190.000 OMR
- Stock: 2-3 weeks
- Model: IC043
• 200/100/60MHz bandwidths
•1GSa/s Real Time sample rate
• Large (7.0-inch) color display,WVGA(800x480)
• Record length up to 1M
• Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
• USB host and device connectivity, standard
• Multiple automatic measurements
• Four math functions, including FFTs standard
• Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
• USB host and device connectivity, standard
• Multiple automatic measurements
• Four math functions, including FFTs standard
• Provides software for PC real-time analysis
Specifications:
Model | DSO5202B | DSO5102B | DSO5062B |
Bandwidth | 200MHz | 100MHz | 60MHz |
Real-time Sample Rate | 1GSa/s | ||
Equivalent Sample Rate | 25GSa/s | ||
Record Length(Sample Points) | Single-channel: Maximum 1M; Dual-channel:Maximum 512K (4K,16K,40K optional) | ||
SEC/DIV Range | 4nS/div-40S/div (in a 2, 4, 8 sequence) | ||
Delay Time Accuracy | 500ps | ||
Vertical | |||
A/D Converter | 8-bit resolution, each channel sampled simultaneously | ||
VOLTS/DIV Range | 2mV/div~5V/div at input BNC | ||
Position Range | ±50V(5V/div),±40V(2V/div~500mV/div),2V(200mV/div~50mV/div)±400mV(20mV/div~2mV/div) | ||
Bandwidth Limit | 20MHz | ||
Rise Time at BNC | ≤1.7ns | ≤3.5ns | ≤5.8ns |
DC Gain Accuracy | ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div ±3% for Sample or Average acquisition mode, 5V/div to 10mV/div | ||
Trigger | |||
Trigger Sensitivity (Edge Trigger Type) | DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full EXT(Typical) 200mV from DC to 40MHz EXT/5(Typical) 1V from DC to 40MHz AC: Attenuates signals below 10Hz HF Reject: Attenuates signals above 80kHz LF Reject: Attenuates signals below 150kHz Noise Reject: Reduces trigger sensitivity | ||
Trigger Level Range | CH1,CH2: ±8 divisions from center of screen EXT: ±1.2V EXT/5: ±6V | ||
Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times ≥20ns) | CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen) EXT: ±(6% of setting + 40mV) EXT/5: ±(6% of setting + 200mV) | ||
Holdoff Range | 100ns-10s | ||
Trigger Type | |||
Edge | Trigger on the rising or falling edge | ||
Pulse Width | Trigger (when >,<,=,≠) on positive or negative pulses Pulse Width Range: 20ns-10s | ||
Video | Trigger on an NTSC, PAL, or SECAM standard video signal Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM) | ||
Slope | Trigger (when >,<,=,≠) on a positive or negative slope Set Time: 20ns–10s | ||
Overtime | from the rising or falling edge Set Time: 20-10s | ||
Alternate | Internal trigger on edge, pulse width, video or slope | ||
Measurement | |||
Cursors | Manual: The difference between voltage cursors V; the difference between time cursors T; 1/T calculated by Hz. Tracing: The voltage and time at a waveform point | ||
Automatic | Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width | ||
3-5 Days
140pcs U Shape Shield Breadboard Jumper Wires..
1.000 OMR
Hot
Solderless MB-102 MB102 Breadboard 830 Tie Point PCB Bread Board Features - Brand new and high quality- Model: MB-102 Breadboard..
1.200 OMR
Description:1.Brand new and high quality.2.Breadboard power supply module, compatible with 5 V, 3.3 V Apply to MB102 breadboard3.Input vol..
0.500 OMR
1-3 Days
Solderless MB-102 MB102 Breadboard 830 Tie Point PCB Bread Board Features - Brand new and high quality- Model: MB-102 Breadboard..
1.200 OMR
2-3 weeks
UNI-T UTP3315TFL 30V 5A Adjustable DC Power Supply Digital High Accuracy 3 Digits Display Voltage Current For Phone RepairUTP3300TFL series are econom..
45.000 OMR
| |||